Driver/Vehicle QR Codes

To replace the PIN entry and Vehicle Selection steps in the app, you can use the device camera to scan a QR Code.

1. To replace the PIN entry and Vehicle Selection steps in the app, you can use the device camera to scan a QR Code.
2. Select your Pump
3. From the Driver PIN entry, select Scan QR
4. Allow access to the camera, hold the QR Code up to the camera. This will capture the driver information, rather than manually keying in the PIN.
5. Select Activate Pump
6. Proceed with the Vehicle Selection
7. From the Vehicle Selection screen, select Scan QR
8. Scan QR using the camera
9. Disconnect transaction once fueling has ceased

If you would like to purchase QR Codes, you can do so on the FuelCloud web portal by following the steps below.

1. Go to Boost-QR Codes
2. Under the QR Code type (Driver/Vehicle), select Order
3. Select the drivers/vehicles you would like to order QR Codes. You can select All or a Custom Selection.
4. Select the Quantity of each you would like
5. Select Next
6. Enter your Shipping information
7. Enter payment information. You can use your existing payment method or add a new one.
8. Select Purchase.