Pulser Guide

Fill-Rite interfaces with dispensers, meters, and registers through programmable pulse outputs.

Most mechanical dispensers, meters, and registers have a pulse output capability or a way to add a pulse output. This is done by adding a pulser if you have not had a fuel management system before, but we can help with that.

Is my system compatible?

Please refer to our Common Hardware & Pulser Compatibility Guide (PDF will open in a new tab). Fill-Rite is compatible if your dispenser, meter, or register is on this list of common hardware.

Did not see your hardware on the list? That is okay, you may have a less common dispenser, meter, or register. Check online for a product guide of your make and model and search the document to see if the device has a “pulse output”.

Dispensers with digital protocol interfaces (RS232, RS485, Ethernet, etc.) are not currently supported by Fill-Rite. Please reach out to Fill-Rite in the future to see if we have added this compatibility.

Not having any luck?

Email fillritesales@fillrite.com with your make, model and photos of your meter or inside of the dispenser and we will review and get back to you.